serial device servers features EKI-1524 provides 2 x 10/100 mbps ethernet ports for lan redundancy provides com port redirection (virtual com), tcp and udp operation modes supports baud rate up to 921.6 kbps allows a max. of 5 hosts to access one serial port allows a max. of 16 hosts to be accessed as tcp client mode built-in 15 kv esd protection for all serial signals provides rich confguration methods including windows utility, telnet console, and web browser supports window 2000/xp/vista drivers automatic rs-485 data fow control snmp mib-ii for network management ? ? ? ? ? ? ? ? ? ? specifcations ethernet communications compatibility ieee 802.3, ieee 802.3u speed 10/100 mbps no. of ports 2 port connector 8-pin rj45 protection built-in 1.5 kv magnetic isolation serial communications port type rs-232/422/485, software selectable no. of ports 4 port connector db9 male data bits 5, 6, 7, 8 stop bits 1, 1.5, 2 parity none, odd, even, space, mark flow control xon/xoff, rts/cts, dtr/dsr baud rate 50 bps ~ 921.6 kbps serial signals rs-232: txd, rxd, cts, rts, dtr, dsr, dcd, ri, gnd rs-422: txd+, txd-, rxd+, rxd-, gnd rs-485: data+, data-, gnd protection built-in 15 kv esd for all signals software driver support windows 2000/xp/vista (x86) utility software advantech serial device server confguration utility operation modes com port redirection mode (virtual com) tcp/udp server (polling) mode tcp/udp client (event handling) mode pair connection (peer to peer) mode confguration windows utility, telnet console, web browser protocol icmp, ip, tcp, udp, bootp, dhcp, auto ip, telnet, snmp, http, dns, smtp, arp, ntp management snmp mib-ii ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? mechanics dimensions (w x h x d) 55 x 140 x 95 mm enclosure metal with solid mounting hardware mounting din-rail, panel weight 668g general led indicators system: power, system status lan: speed, link/active serial: tx, rx reboot trigger built-in wdt (watchdog timer) power requirements power input 12 ~ 48 v dc , redundant dual inputs power connector terminal block power consumption 4 w environment operating temperature 0 ~ 60 c (32 ~ 140 f) storage temperature -20 ~ 80 c (-4 ~ 176 f) operating humidity 5 ~ 95% rh regulatory approvals emc ce, fcc part 15 subpart b (class a) safety ul (ul60950-1) mtbf 862,230 hrs hazardous location ul/cul class i, division 2 ordering information EKI-1524 4-port rs-232/422/485 serial device server ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? introduction EKI-1524 features two independent ethernet ports and mac addresses to provide a redundant network mechanism to guarantee ethernet network reliability. the EKI-1524 is a network-based, serial device server for connecting four rs-232/422/485 devices, such as cncs, plcs, scales, and scanners,directly to a tcp/ip network. once connected through EKI-1524 device server, your serial device will be able to send and receive data on a network like any other network device. EKI-1524 provide a simple and cost-effective way to bring the advantages of remote management and data accessibility to thousands of devices that can not connect to a network. eki-1500 series device servers provide various operations: com port redirection (virtual com port), tcp server,client and udp mode. after advantech redirection software installation, standard serial operating calls are transparently redirected to the eki-1500 series device servers, guaranteeing compatibility with legacy serial devices and enabling backward compatibility with existing software. EKI-1524 also supports serial tunneling, allowing two native serial devices to communicate over a network. 4-port rs-232/422/485 serial device server rohs compliant 2002/95/ec
|
